Heat regenerated purge air cooling adsorption dryer R-DRY BP
Heat regenerated purge air cooling adsorption dryer R-DRY BP 400-20000 are designed for continuous separation of water vapour from compressed air thus lowering the dew point. R-Dry BP heat regenerated purge air cooling adsorption dryer have two columns that operate alternately. Adsorption takes place under pressure in the first column while the second column regenerates (heated ambient air for desorption + expanded dry compressed air purge for cooling). BP type of dryer is suitable for applications where low PDP is required at hotter and more humid ambient conditions and where compressed air can be utilised for cooling. A heat regenerated purge air cooling adsorption dryer consists of two columns, filled with desiccant beads, a blower, heater, controller with an LCD display, valves, manometers, and a support construction. A proven and robust design enables efficient and reliable operation, fast installation and simple maintenance.
Characteristics
| operating presure | 4 to 11 bar |
| operating temp. range | 1,5 to 42,5 °C |
| pressure dew points | -40 °C |
| flow rate | 390 to 20.200 Nm3/h |
| average compressed air consumption | 2-3 % |
INCLUDED
- pre-filter* with automatic drain AOK20B and manometer MDM 40 (R-DRY BP 400-2500), MDA 60 (R-DRY BP 3000-20000),
- after-filter* with manual drain MCD and manometer MDM 40 (R-DRY BP 400-2500), MDA 60 (R-DRY BP 3000-20000),
- Siemens Simatic S7 controller.
*Filters are not mounted.
Applications
Technical data
Contact
Cesta Dolomitskega odreda 10
1000 Ljubljana
Slovenia
- +386 (0)1 200 68 09
- #EM#73606e6677456b626f68276a657f207c79#EM#